Levelling Pad
Ø150 x M24 x 145, nickel-plated
08-18
Knurled Nuts DIN 6303
turned • free cutting steel, black-oxidedStainless steel- and special versions on request! Versions Form A without pin hole Form B with pin hole Product No. Product No. d1 d2 d3 d4 h1 h2 l1 e Form A Form B 05-010 AM05 05-020 BM05 M5 14 20 1,4 12 8 7 2,5 05-010 AM06 05-020 BM06 M6 16 24 1,4…
Grub Screws DIN 6332
with slot and thrust point form S, for combination with thrust pads DIN 6311Versions with hexagon socket and special versions on request! Versions Steel mechanical strength classification 5.8, thrust point case hardened Stainless Steel 1.4305, thrust point unhardened Usage The thrust point of the grub screws can be used directly or in connection with thrust pads DIN 6311 for tensioning. The spring retainer of the thrust…
Thrust Pads DIN 6311
Form S with spring retainerSpecial versions on request! Versions Steel case-hardened steel, spring retainer inlayed Stainless Steel 1.4305, unhardened, spring retainer inlayed Usage The result of combining thrust pads DIN 6311 and grub screws DIN 6332 is a removable tensioning screw which enables the adjustment to level out uneven surfaces. Furthermore it will avoid the transmission of…
T-Nuts DIN 508
Further versions on request! Version Heat-treated steel, quality 10 (black) or quality 8 (blank) Product No. Product No. d T-Slot size to DIN 650 a e h k Quality 10 Quality 8 15-010 M5x6-10 15-020 M5x6-8 M5 6 5,6 10 8 4 15-010 M6x8-10 15-020 M6x8-8 M6 8 7,6 13 10…
Washers DIN 6340
temperedVersions in stainless steel on request! Version Heat-treated steel, stamped out, machine straightened Product No. d1 d2 s for thread 12-010 6,4 6,4 17 3,0 M6 12-010 8,4 8,4 23 4,0 M8 12-010 10,5 10,5 28 4,0 M10 12-010 13,0 13,0 35 5,0 M12 12-010 15,0 15,0 40 5,0 M14 12-010 17,0 17,0 45 6,0…
Hexagon Nuts DIN 6330
Form B with round contact surface at one end • height 1,5dVersions with fine thread or inch thread and further dimensions on request! Version Heat treated steel, quality 10, black-oxided Usage The round contact surface is designed for use with conical seats DIN 6319 or chamfering with 120° in order to levelling out uneven ground. The plane front face can be combined with washers DIN…
Hexagon Collar Nuts DIN 6331
Height 1,5dVersions with fine thread or inch thread and further dimensions on request! Version Heat treated steel, quality 10, black-oxided Product No. d1 d2 m a SW * e 19-020 M06 M6 14 9 3 10 11,5 19-020 M08 M8 18 12 3,5 13 15,0 19-020 M10 M10 22 15 4 16 18,5 19-020 M12 M12…
Hexagon Nuts
with Conical SeatSpecial versions on request! Version Heat treated steel, tempered, black-oxided Usage Hexagon nuts with conical seat are used for levelling out unevenness of nonparallel surfaces (up to 3°). Product No. d1 d2 h SW * 16-020 M08 M08 17 14,0 13 16-020 M10 M10 21 17,5 16 16-020 M12 M12 24 21,5 18 16-020…
Conical Seats DIN 6319 Form G
Steel / Stainless SteelVersions Steel heat treated steel, tempered Stainless Steel 1.4305, unhardened Usage Compared to conical seats form D, due to its solid construction conical seats form G are specially qualified for use with slotted holes or for levelling out uneven ground. Product No. Product No. d2 d4 d5 h3 corresponding Steel Stainless Steel H12…
Conical Seats DIN 6319 Form D
Steel / Stainless SteelVersions Steel case hardened steel Stainless Steel 1.4305, unhardened Usage Due to the dimension it is not allowed to use conical seats form D in connection with slotted holes. Only for use with bore holes. The conical seats has to seat solidly. Product No. Product No. d2 d4 d5 h3 corresponding Steel Stainless…
Positioning Feet
with external thread and convexed surfaceFurther dimensions and special versions on request! Version Steel, case-hardened, black-oxided Usage Positioning feet can be used as stop, rest, feet and plunger. Product No. d1 l1 l2 e SW * Tightening torque ±0,1 Nm (max.) 11-055 BM08x10xSW13 M6 10 20 14,4 13 8,5 11-055 BM08x10xSW17 M8 10 20 19,4 17 18 11-055 BM10x10xSW19…